PVC wood-plastic material (WPC Celuka Foam Board) is PVC resin and wood inorganic and organic combination of the preparation through the series of advanced technologies, the extrusion foam molding, a wood-plastic sheet, extrusions, bar. As the use of the raw materials and production processes do not use glue bonding, no formaldehyde, benzene, ammonia, trichloroethylene, and other harmful substances. And it has water proof, anti-UV, coloring good performance, heat insulation, noise, acid and alkali resistance, insulation, fire-retardant, anti-corrosion, anti-mildew and anti-pest, moisture resistance, sawing, planning nails, and a good mechanical processing performance with natural wood and wood grain nature of flu, and overcome the inherent natural wood cracking, warping, color mycophenolate natural defects and 100 percent recovery, is a jewel of wood instead of the traditional green of new materials.
Wood plastics composite material benefict
1.They are ture hybrid materials and combine the best properties of both wood and plastic.
2.They use loe cost and plentiful raw material .wood waste and recycled plastic become assets
Instead of liabilities.
3.they are competitively priced and are competitive with traditiion material such as timber MDF and PVC-U
4.they are easy produced and easy pfbricated using traditional wood processing techniques.
5.they are available in a board rang of finishes and appearances
6.they are easy recycled after use.
Wood plastic composite properties
1,good stiffness and impact resistance
4.excellent thermal properties
5.low mosture absorption
1.there is negligible waste and any that is produced reused
2.WPCs contain no formaldehyde or volatile organic compounds.
3.WPCs are recyclable and can be reground and reused after their service life.
4.WPCs are considered non-hazardous waste and can be dispose of by standard methods.the basic
Material structure of WPCs means the leaching from WPCs is minial to no-existent.
5.WPCs are enviromentally friendly materials
|Thickness ( mm )||5-25|
|Width* Length ( mm )||1.22*2.44|
|Elongation at break ( Mpa )||>=10|
|Schauder hardness D||>=55|
|Impact strength of free beam( kj/m2)||>=13|
|Heating size change ratio(%)||>=10|
|Variance radio of heating size (%)||+/- 2.0|
|Softening point (%)||>=70|
|Bending strength (Mpa)||>=21|
|Strength of holding screw (N)||>=800|
|Bending elasticity radio (Mpa)||>=600|
|Water absorption (%)||<=1.0|
|Surface density (kg/m3)||<=800|