PVC Celuka Sheet/PVC Celuka Board, PVC Celuka Panel is an extremely versatile material which is suitable for internal and some external applications It is available in white, which is very popular in the international market, it's in matte and glossy finish in selected sizes. It has excellent UV resistance outdoor.
Introduction:
PVC Celuka Sheet is a combination of PVC resin and igorganic that formed in molding with adopting series advanced technology, whom we normally can see his finally different shapes to be shown as wood/plastic sheets, section & bars. There is no glue adhesion used during production, no harmful substances like formaldehyde, benzene, ammonia and trichloroethylene. It shows excellent ability in UVR, dyeing force, heat insulation, soundproof, acid and alkali - resistant, insulation, fire resistance, rot proof, moth and damp proof. Sawing, planing and nailing such kind of machining performances also been played really well by this 100% recycled sheets. Nowadays, it is a new material to replace traditional woods. With comparing to PVC Free Form Sheets, PVC Celuka Sheets taking unique advantages at points of hardness, smoothness, flatness, strength and nailwithdraw as well.
Applications:
1. Trade Fairs & Exhibitions
2. Interior & Exterior Signs
3. Shop fittings & Interior Designs
4. False Ceilings, Wall, Partition & Claddings for construction applications
5. Replacement for standard industrial materials
6. Printing applications like picture mounting
Features:
1, Hard, smooth, glossy finish on both sides
2, High impact and structural strength
3, Excellent resistance to Chemicals.
4, Interior and exterior applications
Specifications:
Thickness:58mm-25mm
Width: 1.22m / 1.56m/2.05m.
Length: 2.44m, 3.05m, etc., (as to your requirement)
Color: White, black, yellow, blue, green, red, all kinds of colors as required.
We also can manufacture according to your requirement
Mechanical Properties
| Project |
Index |
| tensile- strength ( Mpa ) |
>=12 |
| Shao hardness D |
>=55 |
| charpy notched impact strength (kj/m2) |
>=14 |
| elongation ar break (%) |
>=12 |
| heating size change ratio (%) |
>=12 |
| vicat softening point (%) |
+/- 2.0 |
| softening point (ºC) |
>=73 |
| flexural strength (Mpa ) |
>=22 |
| flexile modulus ( Mpa ) |
>=650 |
| strength of holding screw ( N ) |
>=750 |
| water absorption (%) |
<=1.0 |
| Surface density ( kg/m3 ) |
<=750 |
Audited Supplier 
){kind=link}